IRVINE, California, April 28, 2008 – Embraer recently announced the formal roll out of their first fully assembled Phenom 300 Light Jet to begin a series of ground tests in preparation for the new jet’s first flight. This event took place just 10 months after the Phenom 100 Very Light Jet roll out in June 2007.

Eaton is a key supplier on the Phenom 300 providing the hydraulic power generation system. The contract includes the design, development and manufacture of the aircraft’s hydraulic power generation system.

Eaton is also a key supplier on the Phenom 100 including the design, development and manufacture of the aircraft’s secondary power distribution units and cockpit control panels, the hydraulic power generation package and components; the aircraft’s electronically synchronized flap system and cockpit controls, consisting of the throttle control quadrant, landing gear control lever and flap selector control lever.

The Phenom 300 will have a range of 1,800 nautical miles (3,334 km or 2,071 miles) with eight passengers aboard. The aircraft is capable of flying at 45,000 feet at a maximum operating speed of Mach 0.78 and is designed for short-field takeoffs.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

HOUSTON, Texas, February 25, 2008 – Eaton’s aerospace business is showcasing their leadership in rotary aircraft hydraulic power generation, fuel and fluid conveyance systems capabilities through dynamic CGI video presentations and product displays at this year’s HAI Heli-Expo 2008, February 24 through 26 at the George R. Brown Convention Center in Houston, Texas. The Eaton booth location is No. 707.

Eaton component excellence technologies on display will include an EH101/US101 Integrated Hydraulic Power Unit, a rotary aircraft integrated pump package, AH-64 Apache Longbow electrical power module, a jettison fuel pump and System III Hydraulic Power Module.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

SINGAPORE, February 18, 2008 – Eaton’s aerospace business is an exhibitor at this year’s Singapore Air Show 2008 in the new Changi Exhibition Center beginning Tuesday, February 19th through Sunday, February 24th. Eaton’s stand is located at No. P39.

The theme at Eaton’s stand is Integrated System Solutions and Global Customer Support. The booth presentation assisted by dramatic CGI video presentations focuses on Eaton’s leadership in the design, development and total integration of hydraulic power generation and fluid conveyance systems, fluid, fuel and air distribution systems, motion control and actuation systems, propulsion sub-systems as well as cockpit controls and displays, fluid health monitoring systems. In addition, Eaton is involved in several key programs designed to enhance and expand the company’s ability to provide maintenance, repair and overhaul services to a broad and growing customer base in the Asia-Pacific region.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

IRVINE, California, February 4, 2008 – Eaton’s aerospace business has introduced a new emergency hydraulic power system that is designed to provide back-up support in the event of a loss of hydraulic power for single engine aircraft used in military applications.

The motor-pump/controller package features a 5350 RPM DC brushless motor, 16 US Gallons-Per-Minute (GPM) variable displacement pump, custom embedded brushless DC motor control software, custom isolated low voltage power supply and environmentally sealed and EMI protected controller, motor and pump.

A comprehensive data sheet can be ordered by contacting John Ganzerla at Eaton Corporation, Aerospace Operations, 5353 Highland Drive, Jackson, MS 39208, 949-601-3323, or JohnTGanzerla@eaton.com.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

IRVINE, Calif.,… Diversified industrial manufacturer Eaton Corporation’s Aerospace Operations and Curtiss-Wright Corporation recently signed a Memorandum of Understanding (MOU) to develop Curtiss-Wright’s Stress Wave Analysis (SWAN) technology for a new application in rotorcraft drive system conditioning monitoring.

Eaton is a leader in rotorcraft drive system condition monitoring. Over a period of 50 years, Eaton’s patented oil debris sensors and related products have been in operation on virtually every rotorcraft platform around the world. By combining Eaton’s oil debris sensing technology with SWAN, drive train faults can be trended and detected with higher accuracy and virtually eliminate false alarms.

Under the terms of the MOU, Curtiss-Wright is providing the SWAN technology exclusively to Eaton through its acquired Swantech business which operates within the Flow Control segment of the company. Eaton will be able to sell SWAN into the rotorcraft markets globally. Eaton will also deploy SWAN technology under Federal Aviation Administration (FAA) and military flight standards and co-market the new product with the SWAN and Eaton brands. The initial agreement will be in force for a three-year period with an option to renew.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

IRVINE, Calif. … Diversified industrial manufacturer Eaton Corporation (NYSE:ETN) has been selected by Sikorsky Aircraft Corporation, a subsidiary of United Technologies Corporation (NYSE:UTX), to design, develop and supply the lighted control panels and dimming controllers for Sikorsky's new military heavy-lift helicopter, the CH-53K helicopter, which is currently under development for the U.S. Marine Corps. This is in addition to Eaton's contract for the helicopter's hydraulic power generation system, integrated fuel system and fluid conveyance package awarded to Eaton in the third quarter of last year.

During the development phase of the program, which runs through 2014, Eaton will provide the lighted control panel support hardware for five helicopter shipsets in addition to a number of system development test sets. Based on expected production of more than 156 helicopters for the U.S. Marine Corps, the contract value is approximately $20 million and, when combined with anticipated foreign military sales, is expected to exceed $26 million over the approximate 12-year life of the program.

Sikorsky Aircraft Corp., based in Stratford, Conn., is a world leader in helicopter design, manufacturing and service. United Technologies Corp., based in Hartford, Conn., provides a broad range of high technology products and support services to the aerospace and building systems industries.

This news release contains forward-looking statements concerning the revenues expected from the Sikorsky CH-53K program. These statements are subject to various risks and uncertainties, some of which are outside Eaton's control. The following factors could cause actual results to differ materially from those forward-looking statements: reductions in customer orders, changes in governmental priorities, unanticipated technological problems or substantial changes in the economic or financial conditions in the United States. We do not assume any obligation to update these forward-looking statements.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

IRVINE, California, January 14, 2008 – Gulf Air, Bahrain’s national carrier has signed a $6 billion agreement with Boeing for the purchase and delivery of 24 Boeing 787 Dreamliner commercial aircraft to begin in 2016.

The contract includes firm orders for 16 of the Boeing 787-8 airliners worth $3.4 billion with options for an additional eight aircraft.

Eaton Corporation is a key supplier on the Boeing 787 Dreamliner providing engine fuel feed and APU pumps, a variety of fuel system control valves; hydraulic motor and Ram Air Turbine (RAT) hydraulic pump, hydraulic fluid conveyance components; jet engine lube systems, pressure and debris monitoring sensors, filter modules and engine build-up hoses, ducts, tubes and couplings; air management ducting and emergency door actuators and passenger door actuation systems.

The 787 Dreamliner is Boeing’s most successful new program in terms of sales, with more than 800 orders valued at more than $120 billion. It ranks second in commercial orders last year behind Boeing’s most successful existing platform, the 737 narrow-body model.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

IRVINE, California, January 7, 2008 - On December 21, the first completely assembled ARJ-21 -- dubbed the Xiangfeng, or Flying Phoenix -- was towed out of a Shanghai aircraft manufacturing factory hangar in a rollout ceremony. The event was broadcast by the China Central Television network and covered in the official Xinhua News Agency media outlets.

The 90-seat ARJ-21 regional jet is scheduled to make its first flight in March. The aircraft is the first in a planned series of larger airliners, intended to be marketed worldwide.

In 2004, China's AVIC 1 Commercial Aircraft Company Ltd. (ACAC) selected Eaton to design and supply the integrated cockpit panel assemblies and cockpit lighting controller subsystem for the ARJ-21.

The series of integrated panel assemblies supplied by Eaton features Eaton's state of the art NEXGENTM LED-illuminated pushbutton switches mated to Type-7 LED edge-lit panels. In addition, Eaton has designed and supplied a multi-channel cockpit lighting controller, as well as Eaton manufactured toggle and non-illuminated pushbutton switches.

Today, China's aviation industry has turned over a new leaf, said Lin Zuoming, general manager of China Aviation Industry Corporation I (AVIC I). A country's aviation industry is not complete unless it is able to produce civilian aircraft.

AVIC-I expects as the ARJ-21 to dominate China's regional jet market over the next 20 years, with as much as 60 percent of the estimated 900-plane market. The company also hopes for worldwide interest in the plane, and is working with the FAA to develop certification standards.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

IRVINE, California, December 24, 2007 – The United States Air Force has declared the advanced Lockheed Martin and Boeing supersonic F-22 stealth fighter fully operational, almost three years after the first F-22A Raptor arrived at Langley Air Force Base. A declaration of fully operational status means that the military aircraft has fulfilled all weapons operational requirements, the pilots and maintenance crews are fully operational, and the aircraft is fully ready for wartime utilization.

Eaton is a key supplier on the F-22 platform including Vickers 4,000-psi primary engine-driven and auxiliary hydraulic pumps, Sterer nose wheel steering, the aircraft’s cockpit seat Advanced Concept Ejection System (ACES II), weapons bay door actuation/valve packages, Tedeco brand fluid condition monitoring systems, Lubriclone air/oil separator system and a variety of electrical switches, relays pressure sensors and push-button cockpit switches.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2007 sales of $13.0 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 64,000 employees and sells products to customers in more than 140 countries. For more information, visit www.eaton.com.

IRVINE, California, December 17, 2007 – On December 25th, when Santa leaves the North Pole being carried around the world in his ultra high-speed reindeer-driven sleigh, Eaton hydraulics will provide the essential power generation and conveyance systems to assist with the primary and secondary flight controls during the annual all-night journey.

Two Eaton Vickers® brand PV3-056-5 ram air-driven pumps will provide the 3000-psi primary fluid power to the reindeer’s harness flight control valves and actuators delivered through a system of Eaton Aeroquip® brand hose and fittings. Additional Eaton products include an emergency rudder system in case one of the reindeer get dizzy during the flight, and a cargo delivery system control manifold and actuators to assist in off-loading the very large container of gifts.

In the aerospace industry, Eaton is a leading supplier of hydraulic, electro-hydraulic pump and generator products and integrated systems; electric motors; aircraft door actuation, flight and flow control; fluid, fuel and air delivery products and systems; nose wheel steering systems; integrated control systems; cockpit controls and displays; power and load management systems; pressure sensors, seals and fluid health monitoring products and systems. Eaton serves commercial and military aviation, aerospace, military weapons, marine and off-road markets worldwide.

Eaton Corporation is a diversified industrial manufacturer with 2006 sales of $12.4 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 60,000 employees and sells products to customers in more than 125 countries. For more information, visit www.eaton.com.